(4) NEW Anaheim 23MD 175 in-oz Stepper Motor with Driver GHB-14

Link to manufacturers page

https://www.anaheimautomation.com/products/stepper/stepper-integrated-item.php?sID=49&pt=i&tID=132&cID=50

23MD - Stepper Motors with Integrated Drivers

• NEMA 23 Stepper Motor and Microstep Driver
• Eliminates Motor Wires
• Encoder Options Available
• Torque up to 425 oz-in
• Microstep Divisors of 8, 4, 2 or Full Step
• Compact Package
• 12-24V Power Requirement
• TTL Logic or 24V Level Inputs Available
• Ideal for Precise Positioning
• 0.225° Resolution at Eighth Step
• Efficient and Durable
• RoHS Compliant

The 23MD Se

The 23MD Series is a compact construction that implements a microstepping driver and a stepper motor in one streamline package. With the two parts combined into one casing, the need to include motor wires has been eliminated. The high-torque step motor can generate up to 425 oz-in of torque. The microstepping driver will operate off 12VDC minimum to 24VDC maximum with a maximum power intake of 40W. The inputs are capable of running from either open collector or TTL level logic outputs, or sourcing 24VDC outputs from PLCs. The microstepping driver features resolutions from 200 - 1600 steps/revolution, providing smooth rotary operation. The 23MD series comes in either a single shaft version or a double shaft version with optional encoder and motor stack lengths of 1/2, 1, 2, or 3 allowing for varying amounts of start-up torque and inertia. The 23MD series features include built in over temperature and short circuit shut down, automatic 70% reduction in current after clock pulses stop being received, and status LEDs to indicate power on (green LED) and clocks being received (yellow LED). A power supply is required (purchased separately).

Cables to fit the motors are available from the manufacturer

Here are the Cable part numbers

CBL-AA4031-02 2ft Cable

CBL-AA4031-03 3ft Cable

CBL-AA4031-04 4ft Cable

CBL-AA4031-10 10ft Cable

CBL-AA4031-15 15ft Cable

*Please read full description prior to purchase*

**eBay policy restricts the display of phone numbers in the listing**

visit our page Gearheadsurpluscom!!

SELLING "AS IS - WHERE IS" AS DESCRIBED

** see all pictures**

Note to buyer:

1. Review all photos carefully as they are part of the description per eBay policy.
2. Items sold as new, tested, and or working may be returned within 30 days of receiving if not satisfied with purchase (restocking fee may apply). Buyer is responsible for return shipping costs.
3. Items that are untested, for parts or repair, or unknown condition are sold as is and are non-returnable.
4. Items are sold as pictured. If it is not shown in the pictures it doesn't come with the item (i.e. power cords, attachments, tooling, etc.)
5. !! Most listings at the end include a GH and then a number for example ( GH119 ) OR ( A19 ) it is a internal stock reference number and not part of the items description Thanks GearheadSurplus !!

Have Questions? 

Use the above Contact Seller link (on the right hand side near the top of this page) which will take you to our Find Answers from Gearhead Surplus page to get our phone number.

Once on the Contact Seller Find Answers page please scroll down and select "contact seller". This will then take you to a page where you can either send us a message or call us. In order to find the contact number look for the "You can also get the seller's phone number" link in the bottom right hand corner. Once clicked, this will show the number to call.

Even though you can get our number this way, when you are using eBay's messaging system do not ask us for our phone number or give us your phone number since this is still against eBay's terms of service. Giving us your phone number via eBay's messaging system can get you/us suspended.